Extruded Activated Carbon EAC

Coal based pellet activated carbon

Description

This product is refined through the series of production technology with the high quality anthracite coal as raw materials, it has the shape of black particles on appearance. It has the advantage of well-developed pore structure, large surface area, strong adsorption properties, stable chemical performance, and easy regeneration. These are mainly used for gas phase applications because of their low pressure drop, high mechanical strength and low dust content.

Application

1.as catalyst and catalyst carrier in chemistry industry.

2.Treatment and purification of industrial and domestic waters.

3.Purify and separate hydrogen, nitrogen, hydrogen chloride etc;

4..For industrial gas masks and respirators, to guard against poison.

5.For toxic gas purification,Purifying the poisonous gas.

6For water treatment in cold drinks, the depth of industrial water and wastewater

7. for many kinds of air cleaner,air-conditioner air condition fan, lampblack purification and so on.

8.4mm/5mm activated carbon with high adsorption of VOC's(acetone, butanone, ethylacetate, naphtha, toluene, resins), It have the capasity to adsorb 50% from the activated carbon weight. If you put 1000kg of new carbon, after exhaustion must have at least 1500kg weight.Of course, the technical sheet must contain all this info.

9.  4mm/5mm activated carbon through impregnating with KOH 8%, one hour and 60 temperature, it will increase the specific surface and bulk density of activated carbon.About adsorption for H2S, The capasity of sulphur for activated carbon is 17.3mg/g, The Max desulfurization rate: 95%, Gas velocity: 20ml/min.

10. For adorption capacity of chlorine deoxide can reach 111.61mg/g, removing rate 87%.

Specifications