Water resistant honeycomb activated carbon

Water resistant honeycomb activated carbon

Water-resistant honeycomb activated carbon can be used in the adsorption purification, separation and recovery, catalyst carrier, and environmental industries, especially suitable for purification of large flow and low concentrations organic waste gas.

Due to its better properties such as: the larger specific surface area, the good benzene adsorption performance and the low air flow pressure drop, water-resistant honeycomb activated carbon is superior to other similar activated carbon products. It can be used to absorb:

carbon dioxide, nitrogen oxides, carbon disulfide, carbon tetrachloride, hydrogen sulfide, chlorine, benzene, xylene, acetone, ethanol, ethyl ether, methanol, acetic acid, styrene, light gas, gasoline, kerosene, odor, etc.

Main technical specifications:

Dimension: 100 × 100 × 100mm (tolerance ± 1mm); 100 × 100 × 50mm (vertical tolerance of ± 2mm)

Hole density: 50, 100, 150 holes / square inch

Bulk density: 0.38-0 .42g/ml

Absorption of benzene: > 35%

Specific surface area: 600 m2 / g

Use temperature: <350 ° C (desorption temperature shall not exceed the ignition point of absorbed organic waste gas)

Compressive strength :> 0.8MPa

Wind flow speed in empty tower: 0.8m / s (bed thickness 60cm, resistance: 490pa)